Offering > Stock Clearance
This item is available ex-stock, subject to prior sale. Item condition: brand-new, unused, undamaged.
Please email sales@sanhat.com.pk or call 0333 454 1983 for further assistance, thank you.
2x3/2 Directional Valve, 2x3/2 Way Pneumatic Valve
Aventics 0820055101
For series : HF03-LG, CL032x3/2Qn = 850 l/min Pilot valve width : 16 mm NC/NC Plate connection Manual override : with detent Pilot : External
Switching principle 2x3/2
Version Spool valve, positive overlapping
Housing Polyamide fiber-glass reinforced
Sealing material Acrylonitrile butadiene rubber
UR (Underwriters Laboratories)
Protection class IP65
Nominal flow Qn 850 l/min
DC operating voltage 24 V
For series HF03-LG,CL03
Activation Electrically
directional valve 2x3/2
Part No: 0820 055 101
Make: Aventics, formerly Bosch Rexroth Pneumatics
Country of origin: Europe
2x3 / 2-way valve, series HF03-LG - 0820055101
For series: HF03-LG, CL03Qn = 850 l / minPilot valve width: 16 mmNC / NCpanel connectorManual override: detentFeedforward control: external, internal
design type Slide valve, non-overlapping
casing Polyamide, glass fiber reinforced
Material seals Acrylonitrile-butadiene rubber
protection IP65
Nominal flow Qn 850 l / min
Operating voltage DC 24V
For series HF03-LG, CL03
function NC / NC
activity electrical
design type Slide valve, non-overlapping
activity electrical
feedforward external internal
sealing principle soft sealing
Blocking Base plate principle 1-fold
Operating pressure min./max. -0.9 ... 10 bar
Control pressure min./max. 2.5 ... 10 bar
Ambient temperature min./max. 0 ... 50 ° C
Medium temperature min./max. 0 ... 50 ° C
medium compressed air
Max. Particle size 5 μm
Nominal flow Qn 850 l / min
Control air ventilation with collected venting of control air
Degree of protection, with connection IP65
suppressor Zener diode
Reverse polarity protection reverse polarity protection
Status display LED yellow
duty 100%
Typ. switch-on time 16 ms
typ. switch-off time 25 ms
mounting screws Phillips DIN EN ISO 4757-Z1
Tightening torque of the fixing screw 1.3 Nm
mass 0.082 kg
The min. Control pressure must not be fallen below, as otherwise faulty circuits and possibly valve failure may occur!
The pressure dew point must be at least 15 ° C below the ambient and medium temperature and may not exceed max. 3 ° C.
The oil content of the compressed air must remain constant over the entire service life.
Use only oils approved by AVENTICS. For more information, see the document "Technical Information" (available in MediaCentre).
The type of pilot control (external / internal) is not realized in the valve but in the end plate of the valve system.
The pilot valve is UL (Underwriters Laboratories) certified.
material
casing Polyamide, glass fiber reinforced
seals Acrylonitrile-butadiene rubber
Stock Clearance Sale Items
